#*********************************************************************************************************
#this file is configuration for each factory remote device
# 	work_mode	  0 :software mode  1 :hardware mode
#	repeat_enable	  0 :disable repeat 1 :enable repeat
#
#	factory_code      each device has it's unique factory code.
#			  pattern:custom_code(16bit)+index_code(16bit)
#			  examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
#
#	release_delay	  unit:ms.release will report from kernel to user layer after this period of time
#			  from press or repeat triggered.
#
#	debug_enable      0 :debug disable  1 :debug disable
#
# SW MODE:
#	bit_count	  how many bits in each frame
#	tw_leader_act	  time window for leader active
#	tw_bit0		  time window for bit0 time.
#	tw_bit1		  time window for bit1 time
#	tw_repeat_leader  time window for repeat leader
# REG
#	reg_base_gen	  set value for PREG_IR_DEC_BASE_GEN
#	reg_control	  set value for PREG_IR_DEC_CONTROL
#	reg_leader_act	  set value for PREG_IR_DEC_LEADER_ACTIVE
#	reg_leader_idle	  set value for PREG_IR_DEC_LEADER_IDLE
#	reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
#	reg_bit0_time	  set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
work_mode  		= 0
repeat_enable = 1
repeat_delay = 130
repeat_peroid = 120
release_delay   =       20
debug_enable 	= 1

#fn_key_scancode    = 0x5a
#left_key_scancode  = 0x07
#right_key_scancode = 0x01
#up_key_scancode    = 0x45
#down_key_scancode  = 0x55
#ok_key_scancode    = 0x41
#pageup_key_scancode = 0x14
#pagedown_key_scancode = 0x15

custom_begin
    factory_infcode = 0
    factory_code	= 0xef100001
        fn_key_scancode    = 0x5a
        left_key_scancode  = 0x07
        right_key_scancode = 0x01
        up_key_scancode    = 0x18
        down_key_scancode  = 0x55
        ok_key_scancode    = 0x41
        pageup_key_scancode = 0x14
        pagedown_key_scancode = 0x15
    
mouse_begin
    0 0x07
    1 0x01
    2 0x18
    3 0x55
mouse_end
    
key_begin
#power		
        0x45 116   
#vol up ,down
        0x17 115
        0x13 114
#3d   --F3
        0x51 73
#PAGE up,down
        0x14 76
        0x15 77
#play pause
        0x1e 119
#mouse F10
        0x5a 63
#back
        0x00 1
#up,down,left,right
        0x18 103
        0x55 108
        0x07 105
        0x01 106
        0x41 97  #DPAD_CENTER	
#home menu
        0x46 102
        0x1f 139        
#output,0,del
        0x5f  132
        0x4f  11
        0x5e  14

#number
       0x50  2 #No.1 
       0x52  3 #No.2
       0x02  4 #No.3
       0x4c  5 #No.4
       0x4a  6 #No.5
       0x03  7 #No.6
       0x04  8 #No.7
       0x4e  9 #No.8
       0x06  10 #No.9
    key_end
custom_end

custom_begin
    factory_infcode = 1
    factory_code	= 0x40400001
        fn_key_scancode    = 0x5a
        left_key_scancode  = 0x07
        right_key_scancode = 0x01
        up_key_scancode    = 0x18
        down_key_scancode  = 0x55
        ok_key_scancode    = 0x41
        pageup_key_scancode = 0x14
        pagedown_key_scancode = 0x15
    
mouse_begin
    0 0x07
    1 0x01
    2 0x18
    3 0x55
mouse_end

key_begin
    0x01 114 #vol-
    0x45 116 #power
    0x1f 139 #menu
    0x02 4 #No.3
    0x03 7 #No.6
    0x04 8 #No.7
    0x06 10 #No.9
    0x1e 119 #play pause
key_end

custom_end